Introduction

Btrbk is a backup tool for btrfs subvolumes, taking advantage of btrfs specific capabilities to create atomic snapshots and transfer them incrementally to your backup locations.

The source and target locations are specified in a config file, which allows to easily configure simple scenarios like "laptop with locally attached backup disks", as well as more complex ones, e.g. "server receiving backups from several hosts via ssh, with different retention policy".

Key Features:

Atomic snapshots
Incremental backups
Flexible retention policy
Backups to multiple destinations
Transfer via ssh
Resume backups (for removable and mobile devices)
Archive to offline storage
Encrypted backups to non-btrfs storage
Wildcard subvolumes (useful for docker and lxc containers)
Transaction log
Comprehensive list and statistics output
Resolve and trace btrfs parent-child and received-from relationships
List file changes between backups
Calculate accurate disk space usage based on block regions

Btrbk is designed to run as a cron job for triggering periodic snapshots and backups, as well as from the command line (e.g. for instantly creating additional snapshots).

Installation

Btrbk is a single perl script, and does not require any special installation procedures or libraries. Download the latest btrbk source tarball, or try latest master:

wget https://raw.githubusercontent.com/digint/btrbk/master/btrbk
chmod +x btrbk
sudo ./btrbk ls /

For more information, read the installation documentation.

Prerequisites

btrfs-progs: Btrfs filesystem utilities >= v4.12
Perl interpreter: Probably already installed on your system
OpenSSH: If you want to transfer backups from/to remote locations
mbuffer: If you want rate limiting and progress bars

Synopsis

Please consult the btrbk(1) man-page provided with this package for a full description of the command line options.

Configuration File

Before running btrbk, you will need to create a configuration file. You might want to take a look at btrbk.conf.example provided with this package. For a detailed description, please consult the btrbk.conf(5) man-page.

When playing around with config-files, it is highly recommended to check the output using the dryrun command before executing the backups:

btrbk -c /path/to/myconfig -v dryrun

This will read all btrfs information on the source/target filesystems and show what actions would be performed (without writing anything to the disks).

Example: laptop with usb-disk for backups

In this example, we assume you have a laptop with:

a disk having a btrfs root subvolume (subvolid=5) mounted on /mnt/btr_pool, containing a subvolume rootfs for the root filesystem (i.e. mounted on /) and a subvolume home for the user data,
a directory or subvolume /mnt/btr_pool/btrbk_snapshots which will hold the btrbk snapshots,
a backup disk having a btrfs volume mounted as /mnt/btr_backup, containing a subvolume or directory mylaptop for the incremental backups.

Retention policy:

keep all snapshots for 2 days, no matter how frequently you (or your cron-job) run btrbk
keep daily snapshots for 14 days (very handy if you are on the road and the backup disk is not attached)
keep monthly backups forever
keep weekly backups for 10 weeks
keep daily backups for 20 days

/etc/btrbk/btrbk-mylaptop.conf:

snapshot_preserve_min   2d
snapshot_preserve      14d

target_preserve_min    no
target_preserve        20d 10w *m

snapshot_dir           btrbk_snapshots

volume /mnt/btr_pool
  target /mnt/btr_backup/mylaptop
  subvolume rootfs
  subvolume home
  [...]

/etc/cron.daily/btrbk:

#!/bin/sh
exec /usr/bin/btrbk -q -c /etc/btrbk/btrbk-mylaptop.conf run

This will create snapshots on a daily basis:
- /mnt/btr_pool/btrbk_snapshots/rootfs.YYYYMMDD
- /mnt/btr_pool/btrbk_snapshots/home.YYYYMMDD
And create incremental backups in:
- /mnt/btr_backup/mylaptop/rootfs.YYYYMMDD
- /mnt/btr_backup/mylaptop/home.YYYYMMDD

If you want the snapshots to be created only if the backup disk is attached, simply add the following line to the config:

snapshot_create ondemand

For a quick additional snapshot of your home, run:

# btrbk snapshot home

Example: host-initiated backup on fileserver

Let's say you have a fileserver at "myserver.mydomain.com" where you want to create backups of your laptop disk, the config would look like this:

ssh_identity /etc/btrbk/ssh/id_rsa

volume /mnt/btr_pool
  subvolume rootfs
    target /mnt/btr_backup/mylaptop
    target ssh://myserver.mydomain.com/mnt/btr_backup/mylaptop

In addition to the backups on your local usb-disk mounted at /mnt/btr_backup/mylaptop, incremental backups would also be pushed to myserver.mydomain.com.

Example: fileserver-initiated backups from several hosts

If you're a sysadmin and want to trigger backups directly from your fileserver, the config would be something like:

ssh_identity /etc/btrbk/ssh/id_rsa

volume ssh://alpha.mydomain.com/mnt/btr_pool
  target /mnt/btr_backup/alpha
  subvolume rootfs
  subvolume home

volume ssh://beta.mydomain.com/mnt/btr_pool
  target /mnt/btr_backup/beta
  subvolume rootfs
  subvolume dbdata

This will pull backups from alpha/beta.mydomain.com and locally create:

/mnt/btr_backup/alpha/rootfs.YYYYMMDD
/mnt/btr_backup/alpha/home.YYYYMMDD
/mnt/btr_backup/beta/rootfs.YYYYMMDD
/mnt/btr_backup/beta/dbdata.YYYYMMDD

Example: local time-machine (hourly snapshots)

If all you want is to create snapshots of your home directory on a regular basis:

/etc/btrbk/btrbk.conf:

timestamp_format        long
snapshot_preserve_min   18h
snapshot_preserve       48h 20d 6m

volume /mnt/btr_pool
  snapshot_dir btrbk_snapshots
  subvolume home

/etc/cron.hourly/btrbk:

#!/bin/sh
exec /usr/bin/btrbk -q run

Note that you can run btrbk more than once an hour, e.g. by calling sudo btrbk run from the command line. With this setup, all those extra snapshots will be kept for 18 hours.

Example: multiple btrbk instances

Let's say we have a host (at 192.168.0.42) running btrbk with the setup of the time-machine example above, and we need a backup server to only fetch the snapshots.

/etc/btrbk/btrbk.conf (on backup server):

target_preserve_min        no
target_preserve            0d 10w *m

volume ssh://192.168.0.42/mnt/btr_pool
  target /mnt/btr_backup/my-laptop
  subvolume home
    snapshot_dir           btrbk_snapshots
    snapshot_preserve_min  all
    snapshot_create        no

If the server runs btrbk with this config, 10 weeklies and all monthlies are received from 192.168.0.42. The source filesystem is never altered because of snapshot_preserve_min all.

Example: virtual machine setup

Common virtual machine setups have multiple volume sections with same host, but distinct port numbers for each machine.

/etc/btrbk/btrbk.conf:

# This propagates to all subvolume sections:
target /mnt/btr_backup/

volume ssh://localhost:2201/mnt/btr_pool
  group vm vm01
  subvolume home
    snapshot_name vm01-home
  subvolume data
    snapshot_name vm01-data

volume ssh://localhost:2202/mnt/btr_pool
  group vm vm02
  subvolume home
    snapshot_name vm02-home

volume ssh://localhost:2203/mnt/btr_pool
  [...]

This will create /mnt/btr_backup/vm[NN]-home, vm[NN]-data, ...

Note that btrbk holds a single reference to every btrfs filesystem tree, regarding UUID's as "globally unique". If the configured subvolumes point to the same filesystem on different machines (ports), you will see log lines like this when running btrbk -v:

Assuming same filesystem: "ssh://localhost:2201/dev/sda1", "ssh://localhost:2202/dev/sda1"

Example: backup from non-btrfs source

If you want to make backups from a filesystem other than btrfs (e.g. ext4 or reiserfs), you need to create a synchronization subvolume on the backup disk:

# btrfs subvolume create /mnt/btr_backup/myhost_sync

Configure btrbk to use myhost_sync as source subvolume:

volume /mnt/btr_backup
  subvolume myhost_sync
    snapshot_name           myhost

    snapshot_preserve_min   latest
    snapshot_preserve       14d 20w *m

The btrbk package provides the "btrbk-mail" script, which automates the synchronization using rsync, and can be run as cron job or systemd timer unit. For configuration details, see the config section in "/contrib/cron/btrbk-mail".

Alternatively, you can run any synchronization software prior to running btrbk. Something like:

#!/bin/sh
rsync -az --delete \
      --inplace --numeric-ids --acls --xattrs \
      -e 'ssh -i /etc/btrbk/ssh/id_rsa' \
      myhost.mydomain.com:/data/ \
      /mnt/btr_backup/myhost_sync/

exec /usr/bin/btrbk -q run

This will produce snapshots /mnt/btr_backup/myhost.20150101, with retention as defined with the snapshot_preserve option.

Example: encrypted backup to non-btrfs target

If your backup server does not support btrfs, you can send your subvolumes to a raw file.

This is an experimental feature: btrbk supports "raw" targets, meaning that similar to the "send-receive" target the btrfs subvolume is being sent using btrfs send (mirroring filesystem level data), but instead of instantly being received (btrfs receive) by the target filesystem, it is being redirected to a file, optionally compressed and piped through GnuPG.

/etc/btrbk/btrbk.conf:

raw_target_compress   xz
raw_target_encrypt    gpg
gpg_keyring           /etc/btrbk/gpg/pubring.gpg
gpg_recipient         btrbk@mydomain.com

volume /mnt/btr_pool
  subvolume home
    target raw ssh://cloud.example.com/backup
      ssh_user  btrbk
      # incremental  no

This will create a GnuPG encrypted, compressed files on the target host. For each backup, two files are created:

/backup/home.YYYYMMDD.btrfs.xz.gpg: main data file containing the btrfs send-stream,
/backup/home.YYYYMMDD.btrfs.xz.gpg.info: sidecar file containing metadata used by btrbk.

I you are using raw incremental backups, please make sure you understand the implications (see btrbk.conf(5), TARGET TYPES).

Setting up SSH

Since btrbk needs root access, it is very advisable to take all the security precautions you can. In most cases backups are generated periodically without user interaction, so it is not possible to protect your ssh key with a password. The steps below will give you hints on how to secure your ssh server for a backup scenario. Note that the btrbk executable is not needed on the remote side, but you will need the btrfs executable from the btrfs-progs package.

Step 1: Create SSH keypair

On the client side, create a ssh key dedicated to btrbk, without password protection:

ssh-keygen -t rsa -b 2048 -f /etc/btrbk/ssh/id_rsa -C btrbk@mydomain.com -N ""

The content of the public key (/etc/btrbk/ssh/id_rsa.pub) is used for authentication in "authorized_keys" on the server side (see sshd(8) for details).

Step 2 (option): root login restricted by "ssh_filter_btrbk.sh"

Btrbk comes with a shell script "ssh_filter_btrbk.sh", which restricts ssh access to sane calls to the "btrfs" command needed for snapshot creation and send/receive operations (see ssh_filter_btrbk(1)).

Copy "ssh_filter_btrbk.sh" to "/backup/scripts/", and configure sshd to run it whenever the key is used for authentication. Example "/root/.ssh/authorized_keys":

# example backup source (also allowing deletion of old snapshots)
command="/backup/scripts/ssh_filter_btrbk.sh -l --source --delete" <pubkey>...

# example backup target (also allowing deletion of old snapshots)
command="/backup/scripts/ssh_filter_btrbk.sh -l --target --delete" <pubkey>...

# example fetch-only backup source (snapshot_preserve_min=all, snapshot_create=no),
# restricted to subvolumes within /home or /data
command="/backup/scripts/ssh_filter_btrbk.sh -l --send -p /home -p /data" <pubkey>...

Step 2 (option): dedicated user login, using different backend

Create a user dedicated to btrbk and add the public key to "/home/btrbk/.ssh/authorized_keys". In "btrbk.conf", choose either:

backend btrfs-progs-btrbk to use separated binaries with elevated privileges (suid or fscaps) instead of the "btrfs" command (see btrfs-progs-btrbk).
backend btrfs-progs-sudo, configure "/etc/sudoers" and add the ssh_filter_btrbk.sh --sudo option.

Further considerations

You might also want to restrict ssh access to a static IP address within your network:

from="192.168.0.42",command=... <pubkey>...

For even more security, set up a chroot environment in "/etc/ssh/sshd_config" (see sshd_config(5)).

Restoring Backups

Btrbk does not provide any mechanism to restore your backups, this has to be done manually. In the instructions below, we assume that you have a btrfs volume mounted at /mnt/btr_pool, and the subvolume you want to restore is at /mnt/btr_pool/data.

Important: don't use btrfs property set to make a subvolume read-write after restoring. This is a low-level command, and leaves "Received UUID" in a false state which causes btrbk to fail on subsequent incremental backups. Instead, use btrfs subvolume snapshot (without -r flag) as described below.

Step 0: Identify Subvolume

# list snapshots managed by btrbk
btrbk list snapshots

# alternative: list all subvolumes
btrbk ls /
btrbk ls -L /

From the list, identify the snapshot you want to restore. Let's say it's /mnt/btr_pool/_btrbk_snap/data.20150101.

Step 1: Restore Backup

(skip this step if you restore from a snapshot)

# locally mounted backup disk
btrfs send /mnt/btr_backup/data.20150101 | btrfs receive /mnt/btr_pool/

# from / to remote host
ssh root@remote btrfs send /mnt/btr_backup/data.20150101 | btrfs receive /mnt/btr_pool/
btrfs send /mnt/btr_backup/data.20150101 | ssh root@remote btrfs receive /mnt/btr_pool/

Hint: Try to send-receive backups incrementally if possible. In case you still have common snapshot / backup pairs (i.e. both "snapshot_subvol" and "target_subvol" are listed above), use btrfs send -p <parent>.

From this point on, data.20150101 on both disks can be used as parents for subsequent send-receive operations, and a received_uuid relationship is established (see below).

Step 2: Create read-write Subvolume

# if still present, move broken subvolume away
mv /mnt/btr_pool/data /mnt/btr_pool/data.BROKEN

# create read-write subvolume
btrfs subvolume snapshot /mnt/btr_pool/data.20150101 /mnt/btr_pool/data

Your data subvolume is restored, you can carry on with incremental backups to /mnt/btr_backup.

Step 3: Cleanup

# if everything went fine, delete the broken subvolume
btrfs subvolume delete /mnt/btr_pool/data.BROKEN

Make sure to keep data.20150101 subvolumes on both disks at least until you created a new backup using btrbk, in order to keep the incremental chain alive.

Btrfs Relationship (technical note)

btrbk origin -t /mnt/btr_backup/data.20150101
btrbk ls -L /mnt/btr_pool /mnt/btr_backup

received_uuid relationship: correlated, identical read-only subvolumes, cross-filesystem.
```
a.received_uuid = b.received_uuid
a.received_uuid = b.uuid
```
- Required for subvolumes used as parent (or clone-src) of send-receive operations.
- Present on subvolumes created by btrfs send | btrfs receive.
- /mnt/btr_pool/data.20150101 === /mnt/btr_backup/data.20150101
parent_uuid relationship: "is-snapshot-of"
```
a.parent_uuid = b.uuid
```
- Present on subvolumes created by btrfs subvolume snapshot or btrfs send -p | btrfs receive.
- Used by btrbk to determine best parent.
- /mnt/btr_pool/data.20150101 <-- /mnt/btr_pool/data

FAQ

Make sure to also read the btrbk FAQ page. Help improve it by asking!

Donate

So btrbk saved your day?

I will definitively continue developing btrbk for free, but if you want to support me you can do so:

Development

Source Code Repository

The source code for btrbk is managed using Git.

Official repository:

git clone https://dev.tty0.ch/btrbk.git

Mirror on GitHub:

git clone https://github.com/digint/btrbk.git

How to Contribute

Your contributions are welcome!

If you would like to contribute or have found bugs:

Visit the btrbk project page on GitHub and use the issues tracker there.
Talk to us on Freenode in #btrbk.
Contact the author via email (the email address can be found in the sources).

Any feedback is appreciated!

License

btrbk is free software, available under the GNU General Public License, Version 3 or later.

Document Archive: btrbk-0.31.0

btrbk-0.31.0

Introduction

Installation

Prerequisites

Synopsis

Configuration File

Example: laptop with usb-disk for backups

Example: host-initiated backup on fileserver

Example: fileserver-initiated backups from several hosts

Example: local time-machine (hourly snapshots)

Example: multiple btrbk instances

Example: virtual machine setup

Example: backup from non-btrfs source

Example: encrypted backup to non-btrfs target

Setting up SSH

Step 1: Create SSH keypair

Step 2 (option): root login restricted by "ssh_filter_btrbk.sh"

Step 2 (option): dedicated user login, using different backend

Further considerations

Restoring Backups

Step 0: Identify Subvolume

Step 1: Restore Backup

Step 2: Create read-write Subvolume

Step 3: Cleanup

Btrfs Relationship (technical note)

FAQ

Donate

Development

Source Code Repository

How to Contribute

License